Concrete Mineral Admixture

Approx. Rs 12.5 / kgGet Latest Price

GROUND GRANULATED BLAST FURANCE SLAG ( GGBS )

GGBS is used to make durable concrete structures in combination with ordinary portland cement and/or other pozzolanic materials. GGBS has been widely used in Europe, and increasingly in the United States and in Asia (particularly in India, Japan and Singapore) for its superiority in concrete durability, extending the lifespan of buildings from fifty years to a hundred years.

Two major uses of GGBS are in the production of quality-improved slag cement, namely Portland Blastfurnace cement (PBFC) and high-slag blast-furnace cement (HSBFC), with GGBS content ranging typically from 30 to 70% and in the production of ready-mixed or site-batched durable concrete.

Concrete made with GGBS cement sets more slowly than concrete made with ordinary Portland cement, depending on the amount of GGBS in the cementitious material, but also continues to gain strength over a longer period in production conditions. This results in lower heat of hydration and lower temperature rises, and makes avoiding cold joints easier, but may also affect construction schedules where quick setting is required.

Use of GGBS significantly reduces the risk of damages caused by alkali–silica reaction (ASR), provides higher resistance to chloride ingress — reducing the risk of reinforcement corrosion — and provides higher resistance to attacks by sulfate and other chemicals.

Approx. Rs 21 / KilogramGet Latest Price

chemical property :

content

physical property :

 general data    :

free flowing fine powder devoid of grits and impurities 

Additional Information:

Approx. Rs 15.5 / KilogramGet Latest Price

Additional Information:

Approx. Rs 21 / KilogramGet Latest Price

MARBLE POWDER

( MARBLO - XL )

CERTIFICATE OF ANALYSIS

     MARBLO XL ( MARBLE POWDER)

PHYSICAL PROPERTIES: 

 CHEMICAL PROPERTIES: 

Additional Information:

Approx. Rs 28.00 / KilogramGet Latest Price

Approx. Rs 29 / KilogramGet Latest Price

Calcium Chloride
( Anhydrous )
For Concrete application

Investigations have shown that a two per cent addition of calcium chloride has equal cure strength at 50F as plain concrete has at 70F. Regardless of the temperature or cement type, concrete mixes containing calcium chloride will always have a faster cure rate than plain concrete.

The beneficial effects of calcium chloride will be even more pronounced at lower temperatures. The accelerated cure rate measured as final concrete set time can be reduced by two-thirds when two per cent calcium chloride is added - two hours compared to six hours for plain concrete.
calcium chloride can accelerate cement hydration reducing its set time.

That means:

high initial strength
reduced final set time
reduced bleeding
improved workability
fast form work turnaround
greater cost effectiveness
beneficial when used with fly ash or Microsilica

*Effect of Calcium Chloride on Portland Cements and Concretes.

COLD WEATHER CONSTRUCTION

Low temperatures slow concrete hydration. That is why an accelerator is needed to obtain high initial strength. Calcium Chloride accelerates hydration and gives concrete the strength and durability to meet specification requirements at lower temperatures.

• Purity
• Accurate composition
• Longer shelf life
• Aggregate Concrete
• Concrete Admixture
• Cement admixture

Additional Information:

Approx. Rs 68 / KilogramGet Latest Price

Additional Information:

Approx. Rs 13.5 / KilometerGet Latest Price

Approx. Rs 15.5 / KilogramGet Latest Price

MICRO CLAY

For Concrete application

Approx. Rs 38 / KilogramGet Latest Price

Additional Information:

Approx. Rs 20 / KilogramGet Latest Price

Concrete is a mixture comprised of cement (10-15 percent), coarse and fine aggregates (60-75 percent) and water (15-20 percent) by volume.   Foundry sand can be used as a fine aggregate substitute in concrete.  Fine aggregates are generally 3/8 inch or smaller, while coarse aggregates are 3/8 to 2 inches in diameter. 

Foundry sand meets two of the critical requirements for concrete aggregates:  it is uniformly graded, and is strong, hard, and durable.

Additional Information:

Approx. Rs 21 / KilogramGet Latest Price

 Physical Property :

Additional Information:

Approx. Rs 38 / KilogramGet Latest Price

COPPER SLAG

( For Civil / Concrete / Cement application )

Minimum Order Quantity 50 Kilogram

Additional Information:

Approx. Rs 13.5 / KilogramGet Latest Price

Approx. Rs 28 / KilogramGet Latest Price

Certificate of analysis

Molar mass159.69 g/molAppearancered-brown solidOdorodorlessDensity5.242 g/cm3, solidMelting point1,566¿¿ DegreeC; 2,851¿¿ DegreeF; 1,839¿¿K (decomposes)

Additional Information:

Approx. Rs 38 / KilogramGet Latest Price

Copper Slag
 

COLOUR                                                       : BLACKISH GRAY, GLASSY

GRAIN SHAPE                                              : MULTIFACETED

HARDNESS                                                    : >5-7 MOH

BULK DENSITY AT 25                                : 1.8-2.2 TON/M3

PH                                                                   : 6.5

CONDUCTIVITY AT 25                               : NIL

WEIGHT LOSS ON IGNITON                     : 1.75-2.0 % AT 900 C

MOISTURE CONTENT                                : <0.1 %

Additional Information:

Approx. Rs 13.5 / KilogramGet Latest Price

Bentonite

( Calcium Based )

Additional Information: